$32.95 - $32.99
The Masterlink Pliers is a multi-tool developed to provide functions that are not on a typical multi-tool. It is designed to be light and compact so you can carry it with you. This tool serves as a tire lever, valve core remover, valve stem lock nut wrench, and master link pliers. It also provides storage for two master links so you will always be prepared on the trail. Magnets hold the master links securely in place and self close the tool. - Weight: 38.5g - Size: 116 mm x 20 mm x 9 mm - Material: 7075-T6 aluminum - 9, 10, 11, and 12-speed master links and chains - Compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links
- Long lasting teflon paraffin wax and oil penetrant set up dry - Law prohibits orm-D materials from shipping by air
$4.99 - $127.10
- Light viscosity oil for deep penetration with teflon for durability - Law prohibits orm-D materials from shipping by air
Topeak's Hexus X is an award-winning, 21-function multi-tool with updated design to store T15, T25, and 8mm hex tool bits inside. Tire levers are securely side-mounted, and have additional tools built into them. The Hexus X is an excellent choice for both road and mountain bike riders. - Allen wrenches: 2 / 2.5 / 3 / 4 (2 pcs) / 5 / 6 / 8mm - Torx bits: T15 / T25 / T30 - #2 Phillips screwdriver - 14G / 15G spoke wrenches - 2 engineering grade plastic tire levers - Presta Valve Core Tool - Chromoly steel chain tool - Steel wire chain hook - Weight: 170g *Chain tool is compatible with single and multi-speed chains up to 12-speed except Campagnolo 11-speed hollow-pin chains
Stan's 2oz Tire Sealant Injector measures the desired amount of sealant then attaches to your valve stem for easy, no-mess application. And, it works on Presta and Schrader valves!
Remove both Presta and Schrader valve cores with Stan's Core Remover. It's necessary to remove the valve core to inject sealant into the tire.
DOT 5.1 brake fluid is compatible with all SRAM and Avid hydraulic disc brakes - Brake Fluid Type: DOT 5.1 - Bottle Size (Brake Fluid): 4 oz - Application (Brake Fluid): Disc Brakes
$6.99 - $16.99
Rock-N-Roll Extreme is a very clean lubricant due to its ability to shed dirt and dust. - For mountain bike or wet road riding
If you own an Air-Bob inflator, you probably use it A LOT. If you need to replace the original gauge, here's the replacement part to get you back up and running.
If you own an Air-Bob inflator, you probably use it A LOT. When you finally wear out the original inflator head, no problem, here's the replacement part to get you back up and running.
$9.99 - $20.50
- Consumer grade spray cleaner removes dirt and grime - Safe on all parts including carbon
$12.00 - $33.00
- Xtreme chain lube is formulated for long-distance and extreme off-road conditions - MFR bonds to metal surfaces and resists build-Up and tackiness, in addition to shedding water
$3.99 - $120.00
The tire lever, though seemingly one of the simplest and most basic of cycling tools, is one commonly used by almost every cyclist, and unfortunately, one often responsible for unnecessary frustration. Really, what is more fun than flatting far away from home, being thrilled you lugged that spare tube and pump, and then having your tire levers snap in two? Pedro's award-winning, universally loved tire levers feature molded box construction and a proprietary plastic composite blend that makes them the strongest levers available. The unique chisel tip shape easily inserts beneath the tire bead and the slightly thicker shape keeps the lever securely in place. Additionally, the bold shape of the lever and helpful dual spoke hooks makes removal of even the tightest tires a simple task. - Award-winning and universally loved - Molded box construction and proprietary plastic blend makes these the strongest levers available - Chisel tip shape is easy to insert beneath the bead and the slightly thicker shape keeps the tire lever from slipping - Bold shape makes it easy to remove the tightest of tires without bending or breaking
$12.00 - $14.00
- New improved ergonomic y-style handle design - Features refined body shape, quick-spin bit sleeves, longer bits, and bit-size indication - Designed to stand up to the harsh conditions of professional use Recently named VeloNews Editor's Pick for Best 3-Way Wrench, Pedro's popular Y-Wrenches feature heat-treated tool steel construction and durable plastic body designed to stand up to the harsh conditions of professional use. The new improved ergonomic design features a refined body shape for improved fit and comfort, new quick-spin bit sleeves for speed and versatility, and bit size indication for quick tool identification. The torx model Includes T10, T25, and T30 sizes, perfect for the most common torx hardware sizes found on modern bicycles and components, while the hex model includes 4, 5, and 6mm hex sizes, perfect for common hex hardware found on modern bicycles and components. Both are backed by Pedro's lifetime warranty.
Precision CNC machined dual-sided aluminum tool for the installation and removal of 12- and 16-notch external bearing bottom brackets. Anodized for easy identification and featuring a ratchet/torque wrench compatible 3/8" drive. - Fits Enduro T47: 16-notch 52.2mm OD cup - Fits Enduro PF30: 16-notch 52.2mm OD cup - Fits Chris King ThreadFit T47: 12-notch 50.4mm OD cup - Fits Chris King ThreadFit 30: 12-notch 50.4mm OD cup
Precision CNC machined aluminum tool for the installation and removal of 16-notch external bearing bottom brackets. Featuring updated tooth profiles to optimize the fit between the tool and high performance BB parts. Anodized and laser engraved for easy identification and featuring a ratchet/torque wrench compatible 3/8-inch drive. - 16 notch 41mm OD cups - Fits Shimano BBR60 (Ultegra 11-speed 6800 series), Shimano MT-800
Bio ChainBrite Bicycle Chain and Component Cleaning Fluid is a 100% biodegradable, natural, plant-based degreaser formulated for use in Park's CM-5.2 Cyclone Chain Scrubber or as a general purpose degreaser. It won't harm alloy, plastic, or rubber parts. Use CB-4 full strength, do not dilute with water. Cover parts in solvent and scrub using a brush. 16-ounce bottle
A dirty drivetrain causes poor shifting and unnecessary wear to expensive parts. The Chain Gang contains everything needed to quickly and easily clean the chain, freewheel cogs, and chainrings. The Chain Gang includes: - CM-5.3 Cyclone Chain Scrubber - GSC-1 GearClean Brush - 8 oz. bottle of Bio ChainBrite The CG-2.4 works on nearly any bike, including multi-speed, single-speed, and e-bikes.
Cleans bicycle chain quickly, easily, and effectively — without the hassle and mess of removing the chain from the bike. The Cyclone uses a large solvent reservoir, hundreds of rotating bristles, and a two-step cleaning process to get chains really clean, improve shifting performance, and extend the life of the chain and other expensive drivetrain parts. - Works with all multi-speed bikes (5, 6, 7, 8, 9, 10, 11, and 12-speed) as well as some single-speed models and e-bikes - Strong magnet at the bottom of the fluid reservoir holds metallic particles scrubbed from the chain - Special wicking sponge draws solvent from the chain as it exits, minimizing drips and mess - Sturdy handle makes the Cyclone easy to use and control - Holds 2 fluid ounces (59ml) of solvent
A professional quality shop chain tool that works on 5-speed to 12-speed Road and Mountain Bike derailleur chains*, including SRAM AXS 12 speed, as well as 1/8-inch and 3/16-inch chains. The CT-3.3 features an adjustable locating shelf so it works on any width chain to remove and install chain rivets. Built to last and easy to use, the CT-3.3 features a comfortable handle, investment cast steel body and replaceable driving pin (#CTP). *The CT-3.3 will install, but not peen, Campagnolo 11 and 12-speed chain rivets. - Comfortable T-handle - Replaceable driving pin (CTP) - Investment cast steel body - Adjustable locating shelf
• 12” Tungsten steel hacksaw blade specially designed to smoothly cut carbon composite handlebars, forks, seat masts, seat posts, etc. • Fits Park Tool SAW-1 Hacksaw and most 12” hacksaws • The CSB-1 is designed for use with the SG-8 Saw Guide. NOTE: Similar to a grinding stone, do not use this blade on aluminum
Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. The FR-5.2G has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, SunRace, SunTour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also Fits Shimano disc brake lockrings - Guide pin stabilizes tool
Park's Chainwhip/Freewheel and Lockring Remover is for removing cassettes and freewheels, and getting cogs apart, too. It has a long plastic-covered handle for excellent leverage and the chain is attached with hardened pins for durability.
Park's Crank Puller is for removing crankarms on Shimano's splined, oversize, pipe-billet bottom brackets. It employs a long handle and a fine thread for the leverage and torque needed to remove tight arms. Park's unique rotating tip ensures smooth operation and long life. (The CCP-44 does not fit standard square or tapered bottom brackets.)
A favorite of shop mechanics for over 30 year's, Park's CCP-22 Crank Puller removes crankarms that feature square tapers, and those that fit on Power Drive and Power Spline bottom bracket interfaces. The long, comfortable, built-in handle and fine thread provide the leverage needed to remove even the tightest crankarms. And, there's a rotating tip to ensure smooth operation and long life.
The use of cutting oil or fluid is extremely important when performing any cutting, tapping, facing or reaming operation and Park's Cutting Fluid is a high quality, environmentally safe cutting fluid that extends tool life and makes any frame prep job easier and safer. CF-2 can effectively be used on all metals.
Precision component screwdriver machined to exact standards to ensure a perfect fit on compatible component fasteners. Featuring an ergonomic, CNC machined and hard anodized 6061 aluminum handle.
The Park FR-3 Freewheel Remover fits SunTour four-notch freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel.
Park's Gear Clean Brush has a handle on one end with a curved, serrated edge perfect for cleaning between cassette cogs. The other end's tough nylon bristles are ideal for cleaning the derailleurs, chain and other drivetrain parts to keep them clean and prevent premature wear. It also works great on brakes and other components that collect dirt and grime. The GearClean easily fits in a toolbox or pack.
The AWS-1 is one of Park's most-popular tools because it fits the most-turned bicycle bolts. It features 4, 5, and 6mm Allen wrenches in a Y shape for excellent leverage. Each Allen is vinyl coated for comfort.
Page 1 of 26 Next page